For more Information: info@elecschool.com

INDUSTRY PROVEN IPC TRAINING IN EUROPE

IPC 7711 7721

Get your Training & Certification from Industry Expert's.

Book your seat now

IPC 7711/7721 is a set of industry-standard guidelines for the repair and rework of electronic assemblies. The guidelines are published by the IPC, that develops industry standards and best practices for the manufacture and design of electronic products.

Both IPC 7711 and IPC 7721 are widely used in the electronics industry as a reference for repairing and reworking electronic assemblies and PCBAs. They are designed to help ensure that repair and rework processes are carried out in a consistent and reliable manner, resulting in high-quality electronic products.

CERTIFICATION IPC 7711/7721 CERTIFIED IPC SPECIALIST (CIS)

The IPC-7711/7721 is 4 day intensive course on regulations of the industry standard when it comes to surface-mount component removal and repair procedures, no matter what type of board replacement or rework is required. The module rework guide provides learners with the necessary training to carry out module rework, repair, and modification processes.

 

Students must be able to demonstrate their knowledge by reworking, repairing and modifying acceptable artistry samples. They can begin with the most basic modules and improve upon their understanding and skills by tackling more difficult modules as they progress.

The training provided by IPC-7711/7721 regulations is essential for any individual who wants to stay up-to-date with the latest technology in the industry. It not only provides them with the necessary theoretical background but also gives them hands-on experience in this field. With this training, students can gain the confidence and strengthen their skills in order to succeed in their respective career paths.

 

Overall, the IPC-7711/7721 regulations provide comprehensive training that covers all aspects of surface mount component removal and repair procedures. This comprehensive training will ensure that students have a thorough understanding of how to properly handle different types of modules and are well-equipped to provide quality service in the board replacement or surface-mount rework.

What is IPC 7711/7721?

The IPC 7711/7721 standard covers a wide range of topics related to PCB repair and modification, including techniques for repairing damaged PCBs, procedures for modifying PCBs to correct design errors or improve performance, and guidelines for testing and evaluating repaired and modified PCBs.


The standard also provides guidance on the use of specialized tools and equipment, as well as the selection and use of materials and processes for repair and modification.


IPC 7711/7721 is widely used in the electronics industry and is considered an essential reference for technicians, engineers, and others involved in the repair and modification of PCBs and electronic assemblies. It is regularly updated to ensure that it reflects the latest best practices and technologies in the industry.

Curriculum:

Module 1 – IPC-7711 / 7721C Introduction and Common Procedures (Mandatory)

This compulsory Module contains broad content, which is normally implied to all other section of the IPC-7711/7721C course. To obtain certification to additional knowledge modules, this module must be successful completed before it can be taken.

  • Basic skills required to repair and rework circuit boards
  • Skill levels needed
  • Level of conformance the finished product will need to achieve
  • Common terminology used.


Module 2 Workmanship – Wire Splicing

The workmanship of Wire Splicing requires the basic skills this additional knowledge module contains.

  • The Process of Wire Splicing
  • The Four Most Common Splices Mesh, Wrap, Hook, & Lap
  • Feasibility of Repair
  • Insulated Conductor Stripping
  • Tinning methods
  • Soldering
  • Procedures 8.1.1 – 8.1.4
  • Splice acceptance criteria


Module 3 Workmanship – Conformal Coating

The basic and additional knowledge required for Conformal Coating workmanship is contained in this additional knowledge module.

  • Procedure 2.3.1, Coating Removal, Identification of Conformal Coating
  • Procedure 2.3.2, Coating Removal, Solvent Method
  • Procedure 2.3.3, Coating Removal, Peeling Method
  • Procedure 2.3.4, Coating Removal, Thermal Method
  • Procedure 2.3.5, Coating Removal, Grinding/Scraping Method
  • Procedure 2.3.6, Coating Removal, Micro Blasting Method
  • Procedure 2.4.1, Coating Replacement, Solder Resist
  • Procedure 2.4.2, Coating Replacement, Conformal Coating/ Encapsulants
  • Procedure 2.5, Baking and Preheating


Module 4 Workmanship – Through Hole Components

The basic and additional knowledge required for Through Hole Components workmanship is provided in this additional knowledge module.

  • Procedure 3.1.1, Through-Hole Desoldering, Continuous Vacuum
  • Procedure 3.1.2, Through-Hold Desoldering, Continuous Vacuum – Partial Clinch
  • Procedure 3.1.3, Through-Hole Desoldering, Continuous Vacuum – Full Clinch Procedure
  • 1.4, Through-Hole Desoldering, Full Clinch Straightening
  • Procedure 3.1.3, Through-Hole Desoldering, Full Clinch Wicking
  • Installation of Through-Hole components, Tinning, Lead Forming, Soldering


Module 5 Workmanship – Chip and MELF Components

The basic and additional knowledge required for Chip and MELF Component workmanship is contained in this additional knowledge module.

  • Procedure 3.3.1, Chip Component Removal – Bifurcated Tip
  • Procedure 3.3.2, Chip Component Removal – Tweezer Method
  • Procedure 3.3.3, Chip Component Removal – Hot Air Method
  • Procedure 4.1.1, Surface Mount Land Preparation – Individual Method
  • Procedure 4.1.3, Surface Solder Removal – Braid Method
  • Procedure 5.3.1, Chip Installation – Solder Paste Method/Hot Air Pencil
  • Procedure 5.3.2, Chip Installation – Point to Point


Module 6 Workmanship – Gull Wing Lead Components

The basic basic and additional workmanship skills required for making Gull Wing Lead Components are contained in this additional knowledge module.

  • Procedure 3.5.1, SOT Removal – Flux Application Method
  • Procedure 3.5.2, SOT Removal – Flux Application Method –Tweezer
  • Procedure 3.5.3, SOT Removal – Hot Air Pencil
  • Procedure 3.6.2, Gull Wing Removal (two-sided) – Solder wrap Method
  • Procedure 3.6.6, Gull Wing Removal (two-sided) – Tweezer
  • Procedure 3.7.1.1, Gull Wing Removal (four-sided) – Bridge Fill Method – Surface Tension
  • Procedure 3.7.7, Gull Wing Removal (four-sided) – Hot Gas
  • Procedure 3.7.1, Gull Wing Removal (four-sided) – Bridge Fill Method
  • Procedure 4.1.1, Surface Mount Land Preparation – Individual Method
  • Procedure 4.1.2, Surface Mount Land Preparation – Continuous Method
  • Procedure 4.1.3, Surface Solder Removal – Braid Method
  • Procedure 4.4.1, Cleaning SMT Lands – Using Blade Tip and Solder Braid
  • Procedure 4.2.1, Pad Releveling – Using Blade Tip
  • Procedure 4.3.1, SMT Land Tinning – Using the Blade Tip
  • Procedure 5.5.1, Gull Wing Installation – Multi-Lead Method – Top of Lead
  • Procedure 5.5.3, Gull Wing Installation – Point-to-Point Method
  • Procedure 5.5.4, Gull Wing Installation – Hot Air Pencil/Solder Paste Method


Module 7 Workmanship – J-Lead Components

This basic and additional knowledge module provides the foundation skills for the workmanship of J-Lead Components.

  • Procedure 3.8.1.1, J-Lead Removal – Bridge Fill Method – Surface Tension
  • Procedure 3.8.2, J-Lead Removal – Solder Wrap Method – Tweezer
  • Procedure 3.8.3, J-Lead Removal Flux Application Method – Tweezer
  • Procedure 3.8.4, J-Lead Removal – Flux & Tin Tip Only
  • Procedure 3.8.5, J-Lead Removal – Hot Gas Reflow System
  • Procedure 4.1.1, Surface Mount Land Preparation – Individual Method
  • Procedure 4.1.2, Surface Mount Land Preparation – Continuous Method
  • Procedure 4.1.3, Surface Solder Removal, Braid Method
  • Procedure 5.6.1, J-Lead Installation – Solder Wire Method
  • Procedure 5.6.2, J-Lead Installation – Point-to-Point
  • Procedure 5.6.3, J-Lead Installation – Solder Paste/Hot Air


Module 9 Workmanship – Laminate Repair

The basic and additional skills required for Laminate Repair are contained in this additional knowledge module.

  • Procedure 3.3.1, Hole Repair, Epoxy Method
  • Procedure 3.3.2 Hole Repair, Transplant Method
  • Procedure 3.5.1, Base Material Repair, Epoxy Method
  • Procedure 2.6, Epoxy Mixing and Handling


Module 10 Workmanship – Circuit Repair

The basic and additional knowledge module provides the necessary knowledge for Circuit Repair workmanship.

  • Procedure 4.2.1, Conductor Repair, Foil Jumper Epoxy Method
  • Procedure 4.2.2, Conductor Repair, Foil Jumper, Film Adhesive Method
  • Procedure 4.7.1, Surface Mount Pad Repair, Epoxy Method
  • Procedure 5.1, Plated Hole Repair, No Inner Layer Connection
  • Procedure 6.1, Jumper Wires
  • Procedure 2.6, Epoxy Mixing and Handling

 

Benefits of IPC 7711/7721:

It is a set of industry-standard guidelines and procedures for repairing and modifying PCBs and electronic assemblies.

Benefits of J-STD-001

Ensure that rework, modification, and repair processes are performed correctly, which can lead to improved reliability of the resulting work.

Adhering to IPC 7711/7721 guidelines can also help streamline and standardize your rework, modification, and repair processes, which can increase efficiency and reduce the risk of errors.

Help improve the quality of your work, as they provide guidance on how to properly perform rework, modification, and repair processes to meet appropriate standards.

Adhering to IPC 7711/7721 guidelines can help you deliver high-quality work that meets your customers' expectations, which can lead to greater customer satisfaction.

Reduce the risk of liability by demonstrating that you have taken steps to ensure that your work meets appropriate standards for quality and reliability.

IPC 7711/7721
Certification & Recertification :

After completing the Course, students will be required to take a written open-book examination and perform acceptable rework and repairs based on IPC-7711/7721. Upon successful completion of this Course, students are rewarded with an IPC 7711/7721 Certified IPC Specialist Certification that is valid for two(2) years.

For those who have already earned their Certified IPC Specialist (CIS) certification within the past two years, a relevant recertification course or training is available. This recertification offers an opportunity for the previously certified student to brush up on their knowledge and skills and meet the current standards of certification. The recertification process consists of a full review of the material including hands-on activities and an open book written examination.

In addition to the knowledge gained through both the Course and the recertification process, students will also receive valuable insight into today’s industry standards in terms of repair and rework practices. The training provided ensures that all students possess the necessary skills to remain compliant with industry standards and regulations. Furthermore, this training offers a unique opportunity for experienced professionals to upgrade their credentials in order to ensure that their skills remain relevant in a constantly changing environment.

IPC 7711/7721 Certificates:

IPC 7711/7721 CIS (Certified IPC Specialist)
IPC 7711/7721 CIT (Certified IPC Trainer)

INDUSTRY PROVEN IPC TRAINING IN EUROPE

ABOUT ELECSCHOOL

We're an educational institution dedicated to helping individuals develop the skills they need to succeed in the modern world. Our courses are designed to be engaging and informative, with experienced instructors and up-to-date materials. We also offer various services, such as one-on-one tutoring and career counselling.

Leading experts will teach you in an environment of innovation and discovery.

Our support assistance to work towards achieving academic potential.

Provide you with every learning material to gain the skills you’ll need for your career.

Training Academy

At Elecschool, we can provide tailored packages for your specific training needs and ensure that your employees gain the skills they need in order to grow and succeed. Investing in quality training is an investment in your business’s future; contact us today to discuss how our range of on-site and traditional training services can benefit you.

On-Site TRAINING

At Elecshool, we understand the effort and costs associated with sending employees to a training class. That is why we offer On-Site Training, which allows you to reduce the time spent away from the office and traveling as well as reducing the cost of sending people to classes. However, this may only be suitable for organizations that have several people to train, as it may not be cost-effective otherwise. We also have traditional training centers, which offer a more classroom-based approach, and are suitable for smaller groups or individual learners.

 

If you would like to find out more about our training services, or if you wish to learn more about student quantity and material discounts, please contact our business support team. We have a wealth of experience in offering training solutions that work for both small and large organizations, making the most of limited budgets whilst giving people the training they need.